[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with ‘000000′ color & then create the following selection with the help of ‘Elliptical Marquee Tool’

[3]-Now Open New Layer & then fill the selection with any color & then go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[4]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[5]-Now fill the selection with ‘03dc05′ color & then create the following selection with the help of ‘Lasso Tool’with hold Shift

[6]-Now Open New Layer & then fill the selection with ‘016001′ color & create the following selection with the help of ‘Pen Tool’

[7]-Now fill the selection with ‘018d01′ color & then select ‘Burn Tool’ & create the some shading like as shown below

[8]-Now set the 1 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Ellipse Tool’right click select ‘Stroke Path’

[9]-In Stroke Path select ‘Brush’ & then ok

[10]-Now like this create the others & your image should look like as shown below

[11]-Now Open New Layer & then create the following shape with the help of ‘Ellipse Tool’ & select Text Tool click on shape & write I & your image should
look like as shown below

[12]-Like this create the following shape with the help of ‘Ellipse Tool’ & click on shape with Text Tool & create the any Text

[13]-Now select Brush Tool & then press F5 & use the following brush & settings

[14]-Now Open New Layer & then create the following shape with the help of ‘Ellipse Tool’ right click select ‘Stroke Path’

[15]-In Stroke Path select ‘Brush’ & then ok & after that create the following selection with the help of ‘Elliptical Marquee Tool’ with hold shift

[16]-Now fill the selection with ‘02d204′ color
Thanks for read this Photoshop Tutorial.I hope this is a good tutorial & u can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -Draw a Cave in a mountain or cavern using …

www.photoshopinc.com -How to Change or replace a background …

www.photoshopinc.com -How to create shimmering floating soap …

www.photoshopinc.com -Black & white photography

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,Tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with ‘eabf1b’ color & then create the following selection with the help of ‘Pen Tool’ feather radius of selection should 3 pxl

[5]-Now select ‘Burn Tool’ then inverse selection Ctrl+Shift+I & create the following shading

[6]-Now create the following selection with the help of ‘Pen Tool’& create the some shading with the help of ‘Burn Tool’

[7]-Now select Dodge Tool & Highlight the some parts like as shown below

[8]-Now set the 3 pxl Burn Tool & create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[9]-In Stroke Path select ‘Burn’ & then ok & like this create the other shading

[10]-Now make the duplicate layer with the help of Ctrl+J & then press Ctrl+T,right click select ‘Flip Vertical’ & then press ENTER

[11]-Now select ‘Erase Tool’ & use the following settings

[12]-Now Erase the some parts with the help of ‘Erase Tool’

[13]-Now Open New Layer & then create the following selection with the help of ‘Ellipse Tool’

[14]-Now fill the selection with ‘f1f0f0′ color & highlight the some parts with the help of ‘Dodge Tool’ & after that create the following selection with
the help of ‘Ellipse Tool’

[15]-Now fill the selection with ‘000000′ color & then create the following selection with the help of ‘Pen Tool’

[16]-Now Open New Layer & then fill the selection with ‘ec703e’ color & create the some shading with the help of ‘Burn Tool’

[17]-Now set the 2 pxl Brush Tool,Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[18]-In Stroke Path select ‘Brush’ & then ok & after that erase the some parts with the help of ‘Erase Tool’

[19]-See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -Free Adobe Lesson and training Learn how …

Free photoshop tutorials – www.photoshopinc.com – Printing Tips

www.photoshopinc.com -How to create building effect or building …

www.photoshopinc.com -Free Adobe skill photoshop tutorial how …

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Polygonal Lasso Tool’

[3]-Now fill the selection with ‘49baf0′ color & then select ‘Burn Tool’ & create the following shading

[4]-Now go to Blending Options select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss features

[5]-Now Open New Layer [this layer should below previous layer] & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selection with ‘047beb’ color & then create the following selection with the help of ‘Pen Tool’

[8]-Now Open New Layer & then fill the selection with ‘faf68f’ color & use the same Blending Options as used in step-4

[9]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’ & fill with ‘e6b406′ color

[10]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[11]-Now fill the selection with ‘4dcc4b’ color & then create the some shading with the help of ‘Burn Tool’ & use the same Blending Options

[12]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’ & fill with ‘0b890a’ color

[13]-Now like this create the others & your image should look like as shown below

[14]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’ with ‘feather Radius’ of selection should 3 pxl

[15]-Now fill the selection with ‘b3e8b2′ color & like this create the others & fill with different Colors

[16]-See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

Free photoshop tutorials – www.photoshopinc.com – Image …

www.photoshopinc.com -How to Create pink green melted marble

www.photoshopinc.com -Creating Painted Effects with illustrator 7.0

www.photoshopinc.com -3D Effect In Photoshop

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’

[3]-In Make Selection ‘Feather Radius’ should 0 pxl,tick on New Selection & then ok & your image should look like as shown below

[4]-Now fill the selection with ‘ddc276′ color & then select ‘Burn Tool’ & create the following shading

[5]-Now select ‘Dodge Tool’ & Highlight the following parts

[6]-Now go to Filter>Texture>Grain & use the following settings
Photoshop Technique-How to use the Grain features

[7]-Now your image should look like as shown below

[8]-Now Open New Layer [this layer should below previous layer] & then create the following selection with the help of ‘Ellipse Tool’

[9]-Now fill the selection with ‘000000′ color & then go to Filter>Blur>Gaussian Blur & use the following settings
Photoshop Technique-How to use the Gaussian Blur features

[10]-Now your image should look like as shown below

[11]-Like this create the others
See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -The Benefits of Underwater Digital Cameras -

Free photoshop tutorials – www.photoshopinc.com – Printing Tips

Tips -Which are more users friendly Photoshop Elements or …

www.photoshopinc.com -E-books to the rescue

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[3]-Now fill the selection with ‘e6edf5′ color

[4]-Now Open New Layer & then fill the selection with any other color & create the following selection with the help of ‘Pen Tool’ & then press DELETE & like
this delete the other parts

[5]-Now go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[6]-Now select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[7]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[8]-Now fill the selection with ‘747a86′ color & then select ‘Burn Tool’ & create the following shading

[9]-Now select Dodge Tool & Highlight the some parts like as shown below

[10]-Now go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[11]-Now select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[12]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[13]-Now fill the selection with ‘464a62′ color & then go to Blending Options select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss features

[14]-Now like this create the others

[15]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[16]-Now fill the selection with ‘000000′ color & then create the following selection with the help of ‘Elliptical Marquee Tool’

[17]-Now Open New Layer & then fill the selection with any color & then go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[18]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[19]-Now fill the selection with ‘181927′ color & then go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[20]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[21]-Now fill the selection with ‘35394c’ color & then create the following shading with the help of ‘Burn & Dodge Tool’

[22]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[23]-Now fill the selection with ‘282c34′ color & create the some shading with the help of ‘Burn & Dodge Tool’& after that set the 2 pxl Brush Tool,Open New
Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Stroke Path’

[24]-In Stroke Path select ‘Brush’ & then ok & create the some shading with the help of ‘Burn & Dodge Tool’

[25]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[26]-Now fill the selection with ‘0ea847′ color & create the following selection with the help of ‘Elliptical Marquee Tool’& create the following shading
with the help of ‘Burn & Dodge Tool’ with inverse selection Ctrl+Shift+I

[27]-Now select Text Tool & create the any Text & after that select Text & go to Layer>Type>Warp Text & use the following settings

[28]-See below for the Final Photoshop Output.I hope this is a good tutorial & u can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -Digital Printing vs. the Traditional …

www.photoshopinc.com -Digital Vs. Film

www.photoshopinc.com -Imperfect Photos And How You Can Fix Them.

Tips -What has been added and customized to speed up the …

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with ‘b6c2b8′ color & then create the following selection with the help of ‘Rectangular Marquee Tool’

[3]-Now Open New Layer & then fill the selection with any color & then go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[4]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[5]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selection with ‘b6c2b8′ color & then create the following selection with the help of ‘Rectangular Marquee Tool’

[7]-Now select ‘Burn Tool’ & create the following shading with inverse selection Ctrl+Shift+I

[8]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[9]-Now fill the selection with ‘c5cfd0′ color & create the following selection with the help of ‘Pen Tool’

[10]-Now select ‘Dodge Tool’  & highlight the some parts with inverse selection Ctrl+Shift+I & create the some shading
with the help of ‘Burn Tool’

[11]-Now go to Blending Options select ‘Stroke Structure’ & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[12]-Now Open New Layer & then create the following selection with the help of ‘Rectangular Marquee Tool’

[13]-Now fill the selection with ‘d9e1e2′ color & then go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow features

[14]-Now select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure features

[15]-Now highlight the some parts with the help of ‘Dodge Tool’

[16]-Now Oepn New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’ with hold Shift

[17]-Now fill the selection with ‘acbabb’ color & then go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[18]-Now create the some shading with the help of ‘Burn & Dodge Tool’ & your image should look like as shown below

[19]-Like this create the others & after that Open New Layer & create the following selection with the help of ‘Pen Tool’

[20]-Now fill the selection with ‘cf181c’ color & create the following selection with the help of ‘Pen Tool’

[21]-Now fill the selection with ‘7d8c90′ color & create the some shading with the help of ‘Burn Tool’& in Background also

[22]-Now select Text Tool & create the any Text
See below for the Final Photoshop Output.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -How to Create pink green melted marble

www.photoshopinc.com -Creating Painted Effects with illustrator 7.0

www.photoshopinc.com -3D Effect In Photoshop

photoshopinc.com RSS Feed – Articles FREE PHOTOSHOP TUTORIALS Fun …

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now fill the Background with ‘2b86de’ color & then select ‘Burn Tool’ & create the following shading

[3]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[4]-Now fill the selection with same color & create the some shading with the help of ‘Burn Tool’ & then select ‘Dodge Tool’ &
Highlight the some parts like as shown below

[5]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selection with same color & create the following selection with the help of ‘Pen Tool’ & create the following shading with the help of
‘Burn & Dodge Tool’ with inverse selection Ctrl+Shift+I

[7]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[8]-Now fill the selection with ‘8093a3′ color

[9]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[10]-Now fill the selection with ‘0051e3′ color & then Blending Mode of this Layer should ‘Overlay’ & reduce the opacity also

[11]-Now create the some shading with the help of ‘Burn & Dodge Tool’ & your image should look like as shown below

[12]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[13]-Now fill the selection with ‘011779′ color & like this create the others

[14]-Now select Text Tool & create the any Text,right click on Text Layer & select ‘Rasterize Type’& trasform the shape of
Text with the help of Ctrl+T & then press ENTER
Thanks for read this Photoshop Tutorial.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

www.gofindanswer.com – Internet links

www.photoshopinc.com -San Francisco Web Development – Tools

www.vitaminzilla.com – Contact Us

www.photoshopinc.com -MAMBO- a full-featured content management …

[1]-First of all open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now Open New Layer & fill with any color & then go to Blending Options select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay features

[3]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[4]-Now fill the selection with ‘8f8c8c’ color & then select ‘Burn Tool’ & create the following shading

[5]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[6]-Now fill the selectionw with same color & create the following selection with the help of ‘Pen Tool’& create the some shading with the help of ‘Burn Tool’
with inverse selection Ctrl+Shift+I

[7]-Now select ‘Dodge Tool’ & highlight the following parts

[8]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[9]-Now fill the selection with same color & create the following shading with the help of ‘Burn & Dodge Tool’

[10]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[11]-Now fill the selection with ‘444444′ color & create the following selection with the help of ‘Rectangular Marquee Tool’& highlight the selected parts
with the help of ‘Dodge Tool’

[12]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’

[13]-Now fill the selection with ‘bdbcbc’ color & create the following shading with the help of ‘Burn & Dodge Tool’& create the following shading with the
help of ‘Pen Tool’ feather radius’ of selection should 4 pxl & create the following shading

[14]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[15]-Now fill the selection with same color & create the following shading with the help of ‘Burn & Dodge Tool’

[16]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’

[17]-Now fill the selection with ‘547ef9′ color & create the following shading with the help of ‘Burn & Dodge Tool’

[18]-Now go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow features

[19]-Now go to Layer>Layer Style>Create Layer & then ok & after that transform the shading with the help of Ctrl+T & then press ENTER

[20]-Thanks for read this Photoshop Tutorial.I hope you have enjoyed & learnt some Photoshop Techniques & the Final Image should look like as shown below

www.vitaminzilla.com: Tips – Tools For Graphics Designers

www.vitaminzilla.com: Tips – Printing Tips

Free photoshop tutorials – www.photoshopinc.com – PHOTOSHOP …

www.photoshopinc.com -Stock Your Kit with Digital Camera …

[1]-First of all Open New Document of Custom Size,Height & Width 500×500 pxl,Resolution 72 & Mode RGB Color

[2]-Now select ‘Brush Tool’ & use the following Brush & Settings

[3]-Now Open New Layer & then create the following clouds with the help of ‘Brush Tool’

[4]-Now create the following selection with the help of ‘Lasso Tool’ with hold shift

[5]-Now fill the selection with ‘efbdd5′ color & after that select Custom Shape Tool & use the following shape & settings

[6]-Now Open New Layer & then create the following  shape with the help of Custom Shape Tool select ‘Pen Tool’ right click select ‘Make Selection’

[7]-In Make Selection ‘Feather Radius’ should 0 pxl,tick on New Selection & then ok & your image should look like as shown below

[8]-Now fill the selection with ‘d23d95′ color

[9]-Like this create the others
See below for the Final Photoshop Ouput.I hope this is a good tutorial & you can use these Photoshop Techniques in your Graphics Design Project

www.photoshopinc.com -The Benefits of Underwater Digital Cameras -

Free photoshop tutorials – www.photoshopinc.com – Printing Tips

www.vitaminzilla.com – Contact Us

www.photoshopinc.com -MAMBO- a full-featured content management …

[1] Take a new file of 500 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.

[2] Now create a new shape with the help of ‘Polygonal Lasso Tool’ open a new layer fill the selection wtih #b59660.

[3] Take the "Burn Tool" & then create the following selection with the the help of ‘Polgyoanl Lasso Tool’,
& then create the following Shading with the help of Burn Tool do not ‘D’ select.

[4] Now create the following shading with inverse selection press Ctrl+Shift+I.

[5] Create a new shape with the help of ‘Polygonal Lasso Tool’ fill that layer with #c4b08b.

[6] Create another shape with ‘Polygonal Lasso Tool’ fill that layer with #ceb893.

[7] Now create the following selection with ‘Polygonal Lasso Tool’
with the "Dodge Tool" Highlight the following parts as shown below.

[8] Take the ‘Brush Tool’ apply the following settings.

[9] Now create a new layer make sure your foreground is set to #b8a682. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.

[10] Now i am adding a logo also.

[11] Now like this create the others with above techniques.

[12] Now create a new shape wiht the help of ‘Ellipse Shape Tool’ color is Black.

[13] For this shape add the following layer styles.

[14] Now create a shape with ‘Ellipse Shape Tool’ now press Cntl+T, then right click select "Wrap"
& now apply the following settings.

[15] Choose Gradient to and set properties like this.

[16] Apply gradient to selection to get the result like this.

[17] Now like this create the other with above techniques.

[18] For this layer change the ‘Blending Mode’ to "Overlay".

[19] Use Custom Shape Tool and Draw.

[20] For this shape layer set Opacity by 72%.

[21] You’ve already finished this tut with sample details:
This is my final result with some other details.

:: www.photoshopinc.com -Learn to create blue Shaded text Effect

:: www.photoshopinc.com -Lenticular and Holograms 3D Printing …

:: www.photoshopinc.com -Design Book Stacks one top of another

:: www.photoshopinc.com -How to Create pink green melted marble